Ultra Ethylux ® Natural NA502 WM HDPE USP Class VI

Compliance Info

Slide 1 of 1, currently active

General Info

Ultra Ethylux WM HDPE is made from high-density polyethylene resin.

This material is a cost-effective alternative for a variety of end uses, including mild chemical and wear applications.

Ultra Ethylux WM HDPE is available in sheet only and is a made-to-order product.

Longer lead times and minimums may apply.

Ultra Ethylux WM HDPE is FDA, and USP Class VI Compliant.

Key Properties

Stress Relieved
Chemical and Corrosion Resistant
Impact and Abrasion Resistance
Low Moisture Absorption
FDA Compliant
USP Class VI Compliant

Limitations

Difficult to Bond
Poor Dimensional Stability – High Thermal Expansion

Applications

Medical Device Components
Biopharmaceutical Process Equipment Components
Chemical Resistant Applications
Food and Beverage Components

Resin Trade Names

Manufacturer Trade Names

Ultra Ethylux® Natural NA502 WM HDPE

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Sheet Only Compression Sheet Sizing 48 Inch Width by 96 Inch Length 0.250 Inch x 48.000 Inch x 96.000 Inch 0.500 Inch x 48.000 Inch x 96.000 Inch 0.750 Inch x 48.000 Inch x 96.000 Inch 1.000 Inch x 48.000 Inch x 96.000 Inch 1.250 Inch x 48.000 Inch x 96.000 Inch 1.500 Inch x 48.000 Inch x 96.000 Inch 1.750 Inch x 48.000 Inch x 96.000 Inch 2.000 Inch x 48.000 Inch x 96.000 Inch 2.250 Inch x 48.000 Inch x 96.000 Inch 2.500 Inch x 48.000 Inch x 96.000 Inch 2.750 Inch x 48.000 Inch x 96.000 Inch 3.000 Inch x 48.000 Inch x 96.000 Inch 3.250 Inch x 48.000 Inch x 96.000 Inch 3.500 Inch x 48.000 Inch x 96.000 Inch 3.750 Inch x 48.000 Inch x 96.000 Inch 4.000 Inch x 48.000 Inch x 96.000 Inch 48 Inch Width by 120 Inch Length 0.250 Inch x 48.000 Inch x 120.000 Inch 0.375 Inch x 48.000 Inch x 120.000 Inch 0.500 Inch x 48.000 Inch x 120.000 Inch 0.750 Inch x 48.000 Inch x 120.000 Inch 1.000 Inch x 48.000 Inch x 120.000 Inch 1.250 Inch x 48.000 Inch x 120.000 Inch 1.500 Inch x 48.000 Inch x 120.000 Inch 1.750 Inch x 48.000 Inch x 120.000 Inch 2.000 Inch x 48.000 Inch x 120.000 Inch 2.250 Inch x 48.000 Inch x 120.000 Inch 2.500 Inch x 48.000 Inch x 120.000 Inch 2.750 Inch x 48.000 Inch x 120.000 Inch 3.000 Inch x 48.000 Inch x 120.000 Inch 3.250 Inch x 48.000 Inch x 120.000 Inch 3.500 Inch x 48.000 Inch x 120.000 Inch 3.750 Inch x 48.000 Inch x 120.000 Inch 4.000 Inch x 48.000 Inch x 120.000 Inch 60 Inch Width by 120 Inch Length 0.375 Inch x 60.000 Inch x 120.000 Inch 0.500 Inch x 60.000 Inch x 120.000 Inch 0.750 Inch x 60.000 Inch x 120.000 Inch 1.000 Inch x 60.000 Inch x 120.000 Inch 1.250 Inch x 60.000 Inch x 120.000 Inch 1.500 Inch x 60.000 Inch x 120.000 Inch 1.750 Inch x 60.000 Inch x 120.000 Inch 2.000 Inch x 60.000 Inch x 120.000 Inch 2.250 Inch x 60.000 Inch x 120.000 Inch 2.500 Inch x 60.000 Inch x 120.000 Inch 2.750 Inch x 60.000 Inch x 120.000 Inch 3.000 Inch x 60.000 Inch x 120.000 Inch 3.250 Inch x 60.000 Inch x 120.000 Inch 3.500 Inch x 60.000 Inch x 120.000 Inch 3.750 Inch x 60.000 Inch x 120.000 Inch 4.000 Inch x 60.000 Inch x 120.000 Inch

Available Colors

Natural only

Safety Data Sheet

Typical Properties of Ultra Ethylux ® Natural NA502 WM HDPE USP Class VI

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			HDPE High Density Polyethylene
Color			Natural
Manufacturer			Westlake Plastics
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	0.95
	ASTM D792	lb/in³	0.034
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.03
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	4,000
Tensile Modulus	ASTM D638	psi	136,000
Tensile Elongation at Break	ASTM D638	%	700
Flexural Strength	ASTM D638	psi	170,000
Hardness	ASTM D2240	Shore D	D63 - D65
IZOD Impact-Notched	ASTM D256	ft-lb/in	3.2 - 4.5
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D703	x 10-5 in./in./°F	7 - 11
Melting Point Temp			260
			126.6
Max Continuous Operating Temp		°C	98.8
		°F	210
Minimum Operating Temp		°C	-80
		°F	-112
Flammability Rating	UL94	NA	HB
COMPLIANCE
Description			Value
FDA			Yes
USDA			Yes
USP Class VI			Yes
OTHER
Description			Value
ASTM Shape Spec			ASTM D4976-PE235
UV Resistant			No
Relative Cost			$$
Machinability			1

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

Ultra Ethylux® is a registered trademark of Westlake Plastics.

1-800-444-3485

Ultra Ethylux ® Natural NA502 WM HDPE USP Class VI

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.