1-800-444-3485

Micaply G-10 Glass Epoxy Laminate

Compliance Info

Slide 1 of 1, currently active

General Info

Micaply NEMA G10 Grade is a composite laminate sheet or rod made from continuous filament woven fiberglass sheet and epoxy resin. It offers excellent mechanical, electrical, and physical properties up to 140ºC / 284ºF.

It confirms to NEMA L1 1/21 G10 and MIL Spec. 24768/2.

Electrical Properties Table

Electrical Properties	Units	Values
Breakdown Voltage Parallel to laminates	Kv	>45
Breakdown Voltage Perpendicular to laminates	Kv/mm	>15
Insulation resistance	M Ohm	>5 x 10⁴
Comparative Tracking Index	Volts	>200

Key Properties

High Dielectric Strength
High Mechanical Strength
Low CLTE

Limitations

Difficult to Machine
Properties vary based on reinforcement orientation – higher values are typical when tested parallel to the reinforcement and lower when tested perpendicular to the reinforcement.

Applications

Arc Barriers
Downhole Oil and Gas Components
Electrical Housings
Electrical Insulators
Structural Components
Terminal Boards

Resin Trade Names

Manufacturer Trade Names

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Sheet Thickness 0.011 to 4.000 inch Width and Length 48.000 x 48.000 inch, 48.000 x 96.000 inch, 40.000 inch x 118.000 inch Rod Contact us for diameter availability 60-inch lengths Minimum quantities and longer lead times may apply for this product.

Available Colors

Natural (Light Green)

Safety Data Sheet

Typical Properties of Micaply G-10 Glass Epoxy Laminate

DETAIL
Description			Value
Material Type			Thermoset Composite
Chemical Name			Epoxy Glass Laminate
Additives			Woven Fiberglass
Color			Natural (Light Green)
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.85
	ASTM D792	lb/in³	0.067
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.15
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	43,511
Flexural Strength	ASTM D790	psi	55,114
IZOD Impact-Notched	ASTM D256	ft-lb/in	17
THERMAL
Property	Test	Unit of Measure	Value
Max Continuous Operating Temp		°C	140
		°F	284
Minimum Operating Temp		°C	-129
		°F	-200
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No
OTHER
Description			Value
MIL SPEC			NEMA L1 1/21 G10 and MIL Spec. 24768/2.
UV Resistant			No
Relative Cost			$$$
Machinability			10

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.