HYDEL ® PC-7 PC Anti-Static Polycarbonate - Discontinued

Compliance Info

Slide 1 of 1, currently active

General Info

This product has been discontinued, please contact us for alternatives.

Hydel®PC-7 ESD Polycarbonate is a static dissipative thermoplastic product containing carbon Fibril™ nanotubes. Unlike conventional carbon fibers, this technology allows for good dimensional stability after machining, outstanding toughness, consistent electrical properties, excellent surface quality, and minimal sloughing. Hydel®PC-7 is available in rod, slab, tubular bar, and profiles.

Click for more information on the complete line of Polycarbonate Plastics

Key Properties

75% Less Total Carbon Content Than Standard Carbon Filled ESD Materials
Lower Carbon Loading Means Minimal Sloughing or Crayoning Issues; Fewer Particulates
Zero Residual Charge
Nano Fibers Do Not Degrade Physical Properties
Lower Warpage Than Other Carbon Filled Materials
Superior Machined Surface Finish

Limitations

Limited Chemical Resistance
Not Resistant to Repetitive Autoclave
Poor UV Resistance

Applications

Aerospace & Military Components
Ammunition Manufacturing Components
Semiconductor Manufacturing Process Equipment Components

Resin Trade Names

Manufacturer Trade Names

HYDEL® PC-7

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

Black

Safety Data Sheet

Typical Properties of HYDEL ® PC-7 PC Anti-Static Polycarbonate - Discontinued

DETAIL
Description			Value
Material Type			Amorphous Thermoplastic
Chemical Name			PC Polycarbonate
Trade Name			HYDEL® PC-7
Additives			Carbon Nano
Color			Black
Manufacturer			Ensinger
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.2
	ASTM D792	lb/in³	0.043
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.15
Water Absorption, Saturation, Immersion	ASTM D570	% by wt.	0.15
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	9,000
Tensile Modulus	ASTM D638	psi	333,000
Flexural Strength	ASTM D790	psi	10,800
Flexural Modulus	ASTM D790	psi	340,000
Compressive Strength	ASTM D695	psi	12,300
IZOD Impact-Notched	ASTM D256	ft-lb/in	1.2
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	3.7
Heat Deflection Temp	ASTM D648	°C at 264 psi	138
	ASTM D648	°F at 264 psi	280
Max Continuous Operating Temp		°C	127
		°F	260
Minimum Operating Temp		°C	-30
		°F	-22
Flammability Rating	UL94	NA	V-2
ELECTRICAL
Property	Test	Unit of Measure	Value
Surface Resistivity	ASTM D257	ohm/square	10^5 - 10^7
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No
OTHER
Description			Value
Relative Cost			$$$$
Machinability			4

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

HYDEL® is a registered trademark of Ensinger. FIBRIL™ is a Trademark of Hyperion Catalysis International, Inc.

1-800-444-3485

HYDEL ® PC-7 PC Anti-Static Polycarbonate - Discontinued

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.