1-800-444-3485

XP-64T TECATRON ® 40% Fiberglass Filled Natural Tested PPS

Compare Go To Comparison Add Additional Products For Comparison

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

Unit of Measure

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.

3. Please Select Dimensions *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

3. Please Select Length *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

General Info

TECATRON XP-64T PPS is a natural tested 40% fiberglass filled highly crystalline high-temperature thermoplastic with an excellent balance of cost, temperature resistance, strength, chemical resistance and flame retardance.

TECATRON PPS is often used when long-term high-temperature performance and dimensional stability are a must, even in the presence of aggressive chemicals.

Key Properties

  • Creep Resistance
  • Excellent Chemical Resistance
  • High Mechanical Strength
  • High Strength-to-Weight Ratio
  • Higher Heat Deflection Temperature Than Unfilled PPS
  • Long-Term Property Retention
  • Low CLTE

Limitations

  • Low Elongation and Impact Strength of Compression Molded Grades
  • Lower HDT than Equivalent PEEK Grade

Applications

  • Electrical Insulators
  • Oil and Gas Industry Components
  • Pump Housings
  • Sensor Housings
  • Structural Parts

Resin Trade Names

Manufacturer Trade Names

  • XP-64T TECATRON® PPS

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

  • Natural

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of XP-64T TECATRON ® 40% Fiberglass Filled Natural Tested PPS

DETAIL
Description Value
Material Type Semi-Crystalline Thermoplastic
Chemical Name PPS PolyPhenylene Sulfide
Trade Name XP-64T TECATRON® PPS
Additives 40% Fiberglass Natural
Color Natural
Manufacturer Ensinger Special Polymers, Inc.
PHYSICAL
Property Test Unit of Measure Value
Density ASTM D792 g/cm³ 1.7
  ASTM D792 lb/in³ 0.061
MECHANICAL
Property Test Unit of Measure Value
Tensile Strength ASTM D638 psi 6,200
Tensile Modulus ASTM D638 psi 900,000
Tensile Elongation at Break ASTM D638 % 1.1
Flexural Strength ASTM D790 psi 11,000
Flexural Modulus ASTM D790 psi 1,200,000
Compressive Strength ASTM D695 psi- 10% Deformation 25,000
Compressive Modulus ASTM D695 psi 580,000
Hardness ASTM D2240 Shore D 88 Shore D
IZOD Impact-Notched ASTM D256 ft-lb/in 0.7
THERMAL
Property Test Unit of Measure Value
Heat Deflection Temp ASTM D648 °C 112
  ASTM D648 °F 234
Max Continuous Operating Temp °C 232
  °F 450
Minimum Operating Temp °C -20
  °F -4
ELECTRICAL
Property Test Unit of Measure Value
Dielectric Strength ASTM D149 V/mil 591
Dielectric Constant at 1 MHz ASTM D150 50Hz, 200°C 4.6
Surface Resistivity ASTM D257 ohm/square 10^13
COMPLIANCE
Description Value
FDA No
USDA No
NSF No
3-A Dairy No
USP Class VI No
OTHER
Description Value
Relative Cost $$$$$

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECATRON® is a registered trademark of Ensinger.

Related Products

Feedback
Originaltext
Diese Übersetzung bewerten
Mit deinem Feedback können wir Google Übersetzer weiter verbessern