XP-280 TECAPEEK ® 30% Carbon Fiber Filled PBI PEEK

Compliance Info

Slide 1 of 1, currently active

General Info

TECAPEEK 30% Carbon Fiber Reinforced. Similar To Tf-60c, ideal for parts that require high strength, very low creep, and deflection resistance. A great match for planetary gears, office equipment, semiconductor, electronic and mechanical applications.

Click for more information on the complete line of TECAPEEK Plastics

Key Properties

High Strength
Conductive
High Stiffness
Very Low Fatigue

Limitations

Applications

Bearing Cages
Bushings
Compressor Vanes
Dynamic Load Bearing Components
Dynamic Seals
Gears
Glass Handling
Office Equipment
Oil Field Equipment
Oven Conveyors
Piston Rings
Plane Bearings
Planetary Gears
Plasma Torch Tips, Insulators
Pump Bearings
Sliding Surfaces
Soldering Equipment
Synchronizer Rings
Temperature Sensor Housings
Textile Equipment
Thrust Washers
Tilt Pad Bearings
Turbines
Turbo Charger Bushings
Valve Seats, Stem Seals, Packings

Resin Trade Names

Manufacturer Trade Names

XP-280 TECAPEEK® PEEK/PBI

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Sheet Thickness .250” x 2.000” Size W X L 12.000” x 15.000” Thickness .250” to 3.000” Size W X L 10.000” x 10.000” & 13.000” x 13.000 Thickness .250” x 2.500” Size W X L 15.000” x 30.000” & 24.000” x 24.000” Rod Diameter 1.000” to 3.250” Lengths 3.000” to 6.000” L Tube Unfilled PEEK Outside Diameter 1.500” to 81.500” Lengths 3.000” to 6.000” L Filled PEEK Outside Diameter 1.500” to 8.000” Lengths 3.000” to 8.000” Outside Diameter 8.250” to 81.500” Lengths 3.000” to 6.000” L Disks Diameter 3.250” to 26.000” Thickness .500” to 3.000”

Available Colors

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of XP-280 TECAPEEK ® 30% Carbon Fiber Filled PBI PEEK

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			PBI Polybenzimidazole / PEEK Polyetheretherketone Blend
Trade Name			XP-280 TECAPEEK® PEEK/PBI
Additives			30% Carbon Fiber Reinforced. Similar To Tf-60c
Color			Black
Manufacturer			Ensinger Special Polymers, Inc.
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.41
	ASTM D792	lb/in³	0.051
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.15
Water Absorption, Saturation, Immersion	ASTM D570	% by wt.	4
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	19,900
Tensile Modulus	ASTM D638	psi	1,900,000
Tensile Elongation at Break	ASTM D638	%	1.6
Flexural Strength	ASTM D790	psi	32,000
Flexural Modulus	ASTM D790	psi	1,600,000
Compressive Strength	ASTM D695	psi- 10% Deformation	26,000
Compressive Modulus	ASTM D695		500,000
IZOD Impact-Notched	ASTM D256	ft-lb/in	0.8
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	1.4
Heat Deflection Temp	ASTM D648	°C at 264 psi	320
	ASTM D648	°F at 264 psi	608
Melting Point Temp	ASTM D3418	°C	343
	ASTM D3418	°F	649
Thermal Conductivity	ASTM C117	BTU-in/ft²-hr-°F	3.1
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No
OTHER
Description			Value
Relative Cost			$$$$$$$
Machinability			7

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECAPEEK® is a registered trademark of Ensinger.

1-800-444-3485

XP-280 TECAPEEK ® 30% Carbon Fiber Filled PBI PEEK

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.