TECAMID ® MO Type 6/6 Nylon

Compliance Info

Slide 1 of 1, currently active

General Info

TECAMID® 6/6 MO is an extruded "moly" filled nylon 6/6, which is gray in color. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In applications requiring high lubricity, this material may be a good candidate.

Key Properties

Low Surface Friction
Increased Surface Hardness
Increased Heat Resistance
Higher Tensile Properties
Improved Dimensional Stability

Limitations

High Moisture Absorption
Poor Chemical Resistance to Strong Acids and Bases

Applications

Bushings & Bearings
Pulleys
Sheaves
Wear Pads

Resin Trade Names

Manufacturer Trade Names

TECAMID® MO

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

Dark Gray

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of TECAMID ® MO Type 6/6 Nylon

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			PA Polyamide Type 6/6
Trade Name			TECAMID® MO
Additives			Unfilled
Color			Dark Gray
Manufacturer			Ensinger
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.14
	ASTM D792	lb/in³	0.041
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.2
Water Absorption, Saturation, Immersion	ASTM D570	% by wt.	7.5 - 8.5
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	12,000
Tensile Modulus	ASTM D638	psi	550,000
Tensile Elongation at Break	ASTM D638	%	20
Flexural Strength	ASTM D790	psi	17,000
Flexural Modulus	ASTM D790	psi	500,000
Compressive Strength	ASTM D695	psi	14,000
Compressive Modulus	ASTM D695	psi	292,000
Hardness	ASTM D785	NA	Rockwell M87
IZOD Impact-Notched	ASTM D256	ft-lb/in	1.2
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	4
Heat Deflection Temp	ASTM D648	°C at 264 psi	90
	ASTM D648	°F at 264 psi	194
Melting Point Temp	ASTM D3418	°C	255
	ASTM D3418	°F	491
Max Continuous Operating Temp		°C	110
		°F	230
Minimum Operating Temp		°C	-30
		°F	-22
Thermal Conductivity	ASTM C117	BTU-in/ft²-hr-°F	1.7
Flammability Rating	UL94	NA	HB
ELECTRICAL
Property	Test	Unit of Measure	Value
Dielectric Strength	ASTM D149	V/mil	30
Dielectric Constant at 1 MHz	ASTM D150	NA	2.5
Surface Resistivity	ASTM D257	ohm/square	10^14
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No
OTHER
Description			Value
ASTM Shape Spec			D5989 S-PA0111 (Only >0.062" Thickness)
Relative Cost			$$$
Machinability			1

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECAMID® is a registered trademark of Ensinger.

1-800-444-3485

TECAMID ® MO Type 6/6 Nylon

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.