Sustadur PET TF

Compliance Info

Slide 1 of 1, currently active

General Info

SUSTADUR PET TF (polyethylenterephtalate) contains a PTFE additive which offers a lower coefficient of friction, improved wear resistance and a higher limiting PV (pressure-velocity).

Key Properties

Enhanced Wear Resistance vs Unfilled PET
Higher PV vs. Unfilled PET
Lower COF than Unfilled PET

Limitations

derate Impact Strength (Not Recommended for High Impact)
Low Resistance to Continuous Hot Water or Steam
Low Resistance to Strong Alkalies

Applications

Bushings and Bearings
Manifolds
Food Processing Components
Pistons
Valves

Resin Trade Names

Manufacturer Trade Names

Sustadur PET TF

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

NOT A STANDARD PRODUCT MINIMUMS WILL APPLY Available in Sheet, Rod & Tube Boedeker offers cut to size service on all in-stock items and same day shipping. If you don’t see the size your looking for contact us for alternative options.

Available Colors

Gray

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of Sustadur PET TF

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			PET-P Polyethylene Terephthalate Polyester
Trade Name			Sustadur PET TF
Additives			PTFE
Color			Gray
Manufacturer			Rochling
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.44
	ASTM D792	lb/in³	0.052
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.06
Water Absorption, Saturation, Immersion	ASTM D570	% by wt.	0.06
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	10,500
Tensile Modulus	ASTM D638	psi	377,000
Tensile Elongation at Break	ASTM D638	%	5
Flexural Strength	ASTM D790	psi	14,000
Flexural Modulus	ASTM D790	psi	360,000
Compressive Strength	ASTM D695	psi	15,000
Hardness	ASTM D785	NA	Rockwell M94
IZOD Impact-Notched	ASTM D256	ft-lb/in	0.4
Dynamic Coefficient of Friction		NA	0.19
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	4.5
Heat Deflection Temp	ASTM D648	°C at 264 psi	82
	ASTM D648	°F at 264 psi	180
Melting Point Temp	ASTM D3418	°C	255
	ASTM D3418	°F	491
Max Continuous Operating Temp		°C	99
		°F	210
Minimum Operating Temp		°C	-28
		°F	-20
Thermal Conductivity	ASTM C117	BTU-in/ft²-hr-°F	1.9
Flammability Rating	UL94	NA	HB
ELECTRICAL
Property	Test	Unit of Measure	Value
Dielectric Strength	ASTM D149	V/mil	400
Dielectric Constant at 1 MHz	ASTM D150	NA	3.2
Dissipation Factor at 1 MHz	ASTM D150	NA	0.02
Surface Resistivity	ASTM D257	ohm/square	10^16
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No
OTHER
Description			Value
ASTM Shape Spec			ASTM D6261
UV Resistant			No
Relative Cost			$$$$
Machinability			2

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

1-800-444-3485

Sustadur PET TF

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.