1-800-444-3485

Cirlex ® 1200CL.012" (.31mm) Finished Parts Only

Compare Go To Comparison Add Additional Products For Comparison

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

Unit of Measure

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.

3. Please Select Dimensions *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

3. Please Select Length *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

General Info

This product is no longer available in film, only finished parts. Contact us for alternative film materials or finished Cirlex parts.

DuPont ™ Cirlex ® polyimide film is a high performance polymer which combines excellent physical, electrical, and mechanical properties at temperatures as low as -452°F (-269°C) and as high as +650°F (+340°C).

Key Properties

  • Excellent Balance of Physical, Chemical, And Electrical Properties Over A Wide Temperature Range
  • Cirlex ® can be modified by laser cutting, drilling, machining, stamping, shearing and chemical etching to very exact tolerances.

Limitations

Applications

  • Flexible Printed Circuit Board Substrates
  • High-Density Electronic Interconnects
  • High-Temperature Mechanical Seals
  • Loudspeaker Components
  • Metal Clad, Thick Polymide Materials (>0.008" Thick)
  • PCB Stencils

Resin Trade Names

Manufacturer Trade Names

  • Cirlex®

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

<p>This product is no longer available in film, only finished parts. Contact us for alternative film materials or finished Cirlex parts.</p><p></p><p>&nbsp;</p>

Available Colors

  • Amber

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of Cirlex ® 1200CL.012" (.31mm) Finished Parts Only

DETAIL
Description Value
Material Type Imidized Amorphous Thermoplastic
Chemical Name PI Polyimide
Trade Name Cirlex®
Color Amber
Manufacturer Dupont
PHYSICAL
Property Test Unit of Measure Value
Density ASTM D792 g/cm³ 1.42
  ASTM D792 lb/in³ 0.051
Water Absorption, Saturation, Immersion ASTM D570 % by wt. 4
MECHANICAL
Property Test Unit of Measure Value
Tensile Strength ASTM D638 psi 34,000
Tensile Modulus ASTM D638 psi 332,000
THERMAL
Property Test Unit of Measure Value
Coefficient of Linear Thermal Expansion ASTM D696 x 10-5 in./in./°F 11
Max Continuous Operating Temp °C 340
  °F 650
Minimum Operating Temp °C -269
  °F -452
Thermal Conductivity ASTM C117 BTU-in/ft²-hr-°F 0.003
Flammability Rating UL94 NA V-0
COMPLIANCE
Description Value
FDA No
USDA No
NSF No
3-A Dairy No
Canadian Food Inspection Agency No
USP Class VI No
OTHER
Description Value
UV Resistant No
Relative Cost $$$$$

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

KAPTON®, CIRLEX® and VESPEL® are registered trademarks of DuPont.

Related Products

Feedback
Original text
Rate this translation
Your feedback will be used to help improve Google Translate