1-800-444-3485

Quadrant ® PVC (Discontinued)

Compare Go To Comparison Add Additional Products For Comparison

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

Unit of Measure

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.

3. Please Select Dimensions *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

3. Please Select Length *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

General Info

This product has been discontinued. See our PVC Page for PVC Type 1 or go to our complete line of PVC & CPVC Plastics page for a wide range of PVC options. 

PVC (POLYVINYL CHLORIDE) is an economical alternative to more expensive materials for liquid containment. PVC performs in applications up to 160°F and is thermoformable. Quadrant’s PVC sheet is compatible with Type I PVC pipe, so the piping system can be welded directly to the liquid container, eliminating flanges and connectors.

 

Key Properties

  • Performs in applications to 140°F (60°C)
  • Resists mild acids, alkalis and solvents
  • Has UL94 V-O Flammability Rating
  • Is Type I, Grade I gray per ASTM D-1784
  • Thermoforming performance
  • No moisture absorption
  • Chemical- and corrosion-resistant

Limitations

  • Higher Weight than many other Thermoplastics
  • Limited Operating Temperature of 140 F

Applications

  • Acid Baths
  • Air Handling (Scrubbers, Ducts, and Fume Hoods)
  • Chemical Processing Equipment
  • Electrical Cabinets
  • Fabricated Piping Components
  • Laboratory Workstations
  • Plating & Etching Tanks

Resin Trade Names

Manufacturer Trade Names

  • Quadrant® PVC

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

  • Gray

Safety Data Sheet

Contact Us

Typical Properties of Quadrant ® PVC (Discontinued)

DETAIL
Description Value
Material Type Amorphous Thermoplastic
Chemical Name PVC Polyvinyl Chloride
Trade Name Quadrant® PVC
Additives Unfilled
Color Gray
Manufacturer Quadrant
PHYSICAL
Property Test Unit of Measure Value
Density ASTM D792 g/cm³ 1.4
  ASTM D792 lb/in³ 0.051
Water Absorption, 24 hrs, Immersion ASTM D570 % by wt. 0.06
MECHANICAL
Property Test Unit of Measure Value
Tensile Strength ASTM D638 psi 7,500
Tensile Modulus ASTM D638 psi 465,000
Tensile Elongation at Break ASTM D638 % 20
Flexural Modulus ASTM D790 psi 398,000
Hardness ASTM D785 NA Shore D 89
IZOD Impact-Notched ASTM D256 ft-lb/in 0.4
THERMAL
Property Test Unit of Measure Value
Coefficient of Linear Thermal Expansion ASTM D696 x 10-5 in./in./°F 6.1
Max Continuous Operating Temp °C 60
  °F 140
Minimum Operating Temp °C -10
  °F 14
Flammability Rating UL94 NA V-0
ELECTRICAL
Property Test Unit of Measure Value
Surface Resistivity ASTM D257 ohm/square > 10^12
COMPLIANCE
Description Value
FDA No
USDA No
NSF No
3-A Dairy No
Canadian Food Inspection Agency No
USP Class VI No
OTHER
Description Value
UV Resistant No
Relative Cost $
Machinability 2

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

Quadrant® PVC is a registered trademark of Quadrant Engineering Plastic Products.

Related Products

Feedback
Original text
Rate this translation
Your feedback will be used to help improve Google Translate