1-800-444-3485

ULTEM ™ 2200 20% Glass Filled PEI

Compliance Info
ULTEM ™ 2200 20% Glass Filled PEI
Previous Next
  • Slide 1 of 1, currently active

Compare Go To Comparison Add Additional Products For Comparison

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

Unit of Measure

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.

3. Please Select Dimensions *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

3. Please Select Length *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

General Info

Ultem 2200 is a 20% glass filled PEI grade with improved rigidity and stiffness.  This grade is less common and may require minimum runs and longer lead times. See 30% glass filled ULTEM™ 2300 as a readily available option.

Click for more information on the complete line of Ultem PEI Plastics

Key Properties

Limitations

Applications

Resin Trade Names

  • ULTEM ™ 2200 20% Glass Filled

Manufacturer Trade Names

  • Duratron® PEI Grades
  • GEHR PEI
  • SUSTAPEI Grades
  • TECAPEI™ Grades
  • TEMPALUX® PEI Grades
  • UNITEM® PEI
  • ZL® PEI

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

  • Tan Opaque & Black

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of ULTEM ™ 2200 20% Glass Filled PEI

DETAIL
Description Value
Material Type Imidized Amorphous Thermoplastic
Chemical Name PEI Polyetherimide
Trade Name ULTEM ™ 2200
Additives 20% Glass
Color Tan
PHYSICAL
Property Test Unit of Measure Value
Density ASTM D792 g/cm³ 1.42
  ASTM D792 lb/in³ 0.051
Water Absorption, 24 hrs, Immersion ASTM D570 % by wt. 0.19
Water Absorption, Saturation, Immersion ASTM D570 % by wt. 1.1
MECHANICAL
Property Test Unit of Measure Value
Tensile Strength ASTM D68 psi 16,900
Tensile Modulus ASTM D638 psi 700,000
Tensile Elongation at Break ASTM D638 % 3
Flexural Strength ASTM D790 psi 25,000
Compressive Strength ASTM D695 psi 28,000
Hardness ASTM D785 NA Rockwell M114 / R127
IZOD Impact-Notched ASTM D256 ft-lb/in 0.8
THERMAL
Property Test Unit of Measure Value
Coefficient of Linear Thermal Expansion ASTM D696 x 10-5 in./in./°F 1.4
Heat Deflection Temp ASTM D648 °C at 264 psi 208
  ASTM D648 °F at 264 psi 408
Max Continuous Operating Temp °C 171
  °F 340
Minimum Operating Temp °C -50
  °F -58
Thermal Conductivity ASTM C117 BTU-in/ft²-hr-°F 1.43
Flammability Rating UL94 NA V-0
ELECTRICAL
Property Test Unit of Measure Value
Dissipation Factor at 1 MHz ASTM D150 NA 0.002
Surface Resistivity ASTM D257 ohm/square > 10^13
COMPLIANCE
Description Value
FDA No
USDA No
NSF No
3-A Dairy No
Canadian Food Inspection Agency No
USP Class VI No
OTHER
Description Value
UV Resistant Yes
Relative Cost $$$$$
Machinability 6

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

ULTEM is a registered trademark of SABIC.

Related Products

 

Product Details

ULTEM ™ 1000 Natural Unfilled PEI

Product Details

ULTEM ™ 2300 30% Glass Filled PEI

Product Details

ULTEM ™ 2100 10% Glass Filled PEI

Product Details

ULTEM ™ 2200 20% Glass Filled PEI

Product Details

ULTEM ™ 1000 Black PEI

 

 

Product Details

XtremeEPP™ 2154 Glass Filled PEI Polyetherimide

 
Feedback
Originaltext
Diese Übersetzung bewerten
Mit deinem Feedback können wir Google Übersetzer weiter verbessern