1-800-444-3485

Pomalux ® CN-SS Conductive Acetal - Discontinued

Compliance Info

Slide 1 of 1, currently active

General Info

Discontinued - Contact Us for alternative material options.

Key Properties

Limitations

Applications

Resin Trade Names

Manufacturer Trade Names

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Discontinued - Contact Us for alternative material options.

Available Colors

Black

Safety Data Sheet

Typical Properties of Pomalux ® CN-SS Conductive Acetal - Discontinued

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			POM Polyoxymethylene Acetal Copolymer
Trade Name			Pomalux® CN-SS Conductive
Additives			Conductive Stainless Steel
Color			Black
Manufacturer			Westlake
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.5
	ASTM D792	lb/in³	0.054
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	-
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	8,600
Tensile Modulus	ASTM D638	psi	-
Flexural Strength	ASTM D790	psi	13,000
Flexural Modulus	ASTM D790	psi	400,000
IZOD Impact-Notched	ASTM D256	ft-lb/in	0.7
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	4.9
Heat Deflection Temp	ASTM D648	°C at 264 psi	107
	ASTM D648	°F at 264 psi	225
Max Continuous Operating Temp		°C	82
		°F	180
Minimum Operating Temp		°C	-50
		°F	-58
ELECTRICAL
Property	Test	Unit of Measure	Value
Surface Resistivity	ASTM D257	ohm/square	10^2 - 10^6
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.