1-800-444-3485

XP-76T TECATRON ® 55% PTFE Filled Tested PPS Seal Formulation

Compliance Info

Slide 1 of 1, currently active

General Info

Formulated for a wide variety of sealing applications, TECATRON XP-76T PPS is a tested 55% PTFE filled crystalline high-temperature thermoplastic with an excellent balance of cost, temperature resistance, strength, chemical resistance and flame retardance. TECATRON PPS is often used when long-term high-temperature performance and dimensional stability are a must, even in the presence of aggressive chemicals.

Key Properties

Limitations

Applications

Seals

Resin Trade Names

Manufacturer Trade Names

XP-76T TECATRON® PPS

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of XP-76T TECATRON ® 55% PTFE Filled Tested PPS Seal Formulation

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			PPS PolyPhenylene Sulfide
Trade Name			XP-76T TECATRON® PPS
Additives			55% PTFE Seal Material Tested
Manufacturer			Ensinger Special Polymers, Inc.
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	lb/in³	0
THERMAL
Property	Test	Unit of Measure	Value
Max Continuous Operating Temp		°C	232
		°F	450
Minimum Operating Temp		°C	-20
		°F	-4
OTHER
Description			Value
Relative Cost			$$$$$

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECATRON® is a registered trademark of Ensinger.