1-800-444-3485

Radel ® A PES 30% Glass (AG-330) (Discontinued)

Compliance Info

Slide 1 of 1, currently active

General Info

Radel® A (Discontinued) is no longer available and was replaced by Solvay's Veradel® A. However, Veradel® A is not typically available in extruded sheets, rods, or tubes. Please contact us for alternative options.

Key Properties

Limitations

Applications

Resin Trade Names

Manufacturer Trade Names

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

This product has been discontinued. Please contact us for alternative options.

Available Colors

Safety Data Sheet

Typical Properties of Radel ® A PES 30% Glass (AG-330) (Discontinued)

DETAIL
Description			Value
Material Type			Amorphous Thermoplastic
Chemical Name			PES Polyethersulfone
Trade Name			Radel® A (AG-330)
Additives			30% Glass
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.58
	ASTM D792	lb/in³	0.057
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.39
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	D638	psi	18,900
Tensile Modulus	ASTM D638	psi	825,000
Flexural Strength	ASTM D790	psi	23,500
Flexural Modulus	ASTM D790	psi	950,000
Compressive Strength	ASTM D695	psi	25,600
Compressive Modulus	ASTM D695	psi	1,119,000
Hardness	ASTM D785	NA	Rockwell M80/R124
IZOD Impact-Notched	ASTM D256	ft-lb/in	1.4
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	1.7
Heat Deflection Temp	ASTM D648	°C at 264 psi	215
	ASTM D648	°F at 264 psi	420
Max Continuous Operating Temp		°C	160
		°F	320
Thermal Conductivity	ASTM C117	BTU-in/ft²-hr-°F	1.35
Flammability Rating	UL94	NA	V-0
ELECTRICAL
Property	Test	Unit of Measure	Value
Dielectric Strength	ASTM D149	V/mil	440
Dissipation Factor at 1 MHz	ASTM D150	NA	0.002
COMPLIANCE
Description			Value
FDA			Yes
USDA			Yes
NSF			Yes
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No
OTHER
Description			Value
UV Resistant			No
Relative Cost			$$$$$$$
Machinability			3

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

RADEL and UDEL are registered trademarks of Solvay.