1-800-444-3485

TECAPRO ™ MT White

Compliance Info

Slide 1 of 4, currently active
Slide 2 of 4
Slide 3 of 4
Slide 4 of 4

General Info

TECAPRO® MT is a white heat stabilized homopolymer polypropylene material specifically designed for stability in high-heat environments. This results in a product with exceptionally low residual stress, allowing for the fabrication of dimensionally stable parts with varying cross-sections. This characteristic reduces the tendency for parts to warp following repeated superheated steam sterilization. Additionally, TECAPRO MT’s low density makes it easy to machine into lightweight components often used in medical technology. The material has been thoroughly tested for biocompatibility according to ISO 10993, and TECAPRO MT white has also been tested according to USP Class VI.

TECAPRO® MT can withstand higher service temperatures with less water absorption than standard polypropylene. The enhanced properties of TecaPro ® MT make this material an excellent candidate for replacement of PBT, Acetal, PTFE, PPO and several other high-performance plastics. Recommended sterilization techniques include steam autoclaving and cold sterilization.

Key Properties

Autoclavable
Biocompatible
FDA Compliant
Good chemical resistance
Higher Operating Temp Than Standard Polypro
Hydrolysis and superheated steam resistant
Low moisture absorption
Low Residual Stress for Improved Dimensionally Stable Parts with Varying Cross Sections

Limitations

Poor Resistance to Aromatic, Aliphatic and Chlorinated Solvents.

Applications

Autoclavable Medical Components
Surgical Trays, Caddies / Cases

Resin Trade Names

Manufacturer Trade Names

TECAPRO™

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

Black
White

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of TECAPRO ™ MT White

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			PP Polypropylene
Trade Name			TECAPRO™ MT
Additives			Heat Stabilized
Color			White
Manufacturer			Ensinger
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	0.92
	ASTM D792	lb/in³	0.033
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.1
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	5,100
Flexural Strength	ASTM D790	psi	7,830
Flexural Modulus	ASTM D790	psi	210,000
Compressive Modulus	ASTM D695	psi	232,000
IZOD Impact-Notched	ASTM D256	ft-lb/in	0.899
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	4.6
Heat Deflection Temp	ASTM D648	°C at 264 psi	86
	ASTM D648	°F at 264 psi	186
Melting Point Temp	ASTM D3418	°C	160
	ASTM D3418	°F	320
Max Continuous Operating Temp		°C	100
		°F	212
Minimum Operating Temp		°C	0
		°F	32
Flammability Rating	UL94	NA	HB
ELECTRICAL
Property	Test	Unit of Measure	Value
Surface Resistivity	ASTM D257	ohm/square	10^14
COMPLIANCE
Description			Value
FDA			Yes
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			Yes
OTHER
Description			Value
UV Resistant			No
Relative Cost			$
Machinability			2

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECAPRO is a registered trademark of Ensinger Company.