XP-89 TECATRON ® 20% Carbon Fiber 10% PTFE & 5% Graphite Filled PPS

Compliance Info

Slide 1 of 1, currently active

General Info

TECATRON PPS XP-89 is a 20% carbon fiber, 10% PTFE & 5% graphite filled highly crystalline high-temperature thermoplastic with an excellent balance of cost, temperature resistance, strength, chemical resistance and flame retardance. TECATRON PPS is often used when long-term high-temperature performance and dimensional stability are a must, even in the presence of aggressive chemicals.

Key Properties

Excellent Chemical Resistance
Improved Wear Properties over unfilled PPS
High Temp
Good Dimensional Stability
Low Moisture Absorption

Limitations

Applications

High Temp Bearing and Wear Applications
High Temp Seals
Chemical Resistant Components
Pump and Valve Components
Oil and Gas Components
Thrust Washers
Bushing and Bearings

Resin Trade Names

Manufacturer Trade Names

XP-89 TECATRON® PPS

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

. Sheet .250 to 2.500 Inch Thick x 10.000 Wide x 10.000 Long .250 to 2.500 Inch Thick x 13.000 Wide x 13.000 Long .375 to 2.500 Inch Thick x 15.000 Wide x 30.000 Long .375 to 2.500 Inch Thick x 24.000 Wide x 24.000 Long Rod 1.000 to 4.000 Inch OD x 3.000 to 12.000 Inch Lengths Disk 4.250 to 26.000 Inch OD x .500 to 3.500 Inch Thickness Tube 1.750 to 8.000 Inch OD x 3.000 to 12.000 Inch Lengths 8.250 to 90.000 Inch OD x 3.000 to 6.000 Inch Lengths

Available Colors

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of XP-89 TECATRON ® 20% Carbon Fiber 10% PTFE & 5% Graphite Filled PPS

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			PPS PolyPhenylene Sulfide
Trade Name			XP-89 TECATRON® PPS
Additives			20% Carbon Fiber 10% PTFE 5% Graphite
Manufacturer			Ensinger Special Polymers, Inc.
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	lb/in³	0.055
	ASTM D792		1.52
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	3,100
Tensile Modulus	ASTM D638	psi	880,000
Tensile Elongation at Break	ASTM D638	%	0.3
Flexural Strength	ASTM D790	psi	5,200
Flexural Modulus	ASTM D790	psi	900,000
Compressive Strength	ASTM D695	psi	14,200
Hardness	ASTM D2240	Shore D	86 Shore D
THERMAL
Property	Test	Unit of Measure	Value
Max Continuous Operating Temp		°C	232
		°F	450
Minimum Operating Temp		°C	-20
		°F	-4
OTHER
Description			Value
Relative Cost			$$$$$

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECATRON® is a registered trademark of Ensinger.

1-800-444-3485

XP-89 TECATRON ® 20% Carbon Fiber 10% PTFE & 5% Graphite Filled PPS

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.