1-800-444-3485

TECATOR ® 5013 PAI

Compliance Info

Slide 1 of 1, currently active

General Info

TECATOR® TI5013 unfilled PAI Polyamide-imide maintains excellent mechanical properties in temperature environments exceeding 500°F. TECATOR® TI5013, is a high strength structural grade featuring good electrical properties and strength, making it ideal for demanding structural applications at a broad range of temperatures.

Key Properties

Excellent Electrical Properties
Excellent Weather and Gamma Radiation Resistance
Good Chemical Resistance - Not Attacked by Common Solvents or Fuels and Is Acceptable for use in Contact with Many Acids
High Dielectric Strength Of 600 V/Mil.
High Strength and Stiffness
Maintains A High Proportion of Mechanical Properties Over a Broad Temperature Spectrum - Cryogenic To 500°F
Outstanding Bearing and Wear Properties

Limitations

High Moisture Absorption

Applications

Burn in Test Sockets
Electrical Housings
Electrical Insulating Applications
High Temp. Structural Components

Resin Trade Names

Manufacturer Trade Names

TECATOR® 5013

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

Yellow Brown

Safety Data Sheet

Typical Properties of TECATOR ® 5013 PAI

DETAIL
Description			Value
Material Type			Imidized Amorphous Thermoplastic
Chemical Name			PAI Polyamide-imide
Trade Name			TECATOR® 5013
Additives			Unfilled
Color			Yellow Brown
Manufacturer			Ensinger
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.41
	ASTM D792	lb/in³	0.051
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.3
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Elongation at Break	ASTM D638	%	15
Flexural Strength	ASTM D790	psi	33,000
Flexural Modulus	ASTM D790	psi	711,000
Compressive Strength	ASTM D695	psi	30,000
Hardness	ASTM D785	NA	Rockwell M119
IZOD Impact-Notched	ASTM D256	ft-lb/in	2.3
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	1.66
Heat Deflection Temp	ASTM D648	°C at 264 psi	278
	ASTM D648	°F at 264 psi	532
Max Continuous Operating Temp		°C	260
		°F	500
Minimum Operating Temp		°C	-200
		°F	-328
Flammability Rating	UL94	NA	V-0
ELECTRICAL
Property	Test	Unit of Measure	Value
Dielectric Strength	ASTM D149	V/mil	600
Surface Resistivity	ASTM D257	ohm/square	10^15
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No
OTHER
Description			Value
UV Resistant			No
Relative Cost			$$$$$$$
Machinability			5

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECATOR® is a registered trademark of Ensinger.