XP-96B TECAPEEK ® Unfilled Black PEEK

Compliance Info

Slide 1 of 1, currently active

General Info

TECAPEEK Unfilled Black a high-performance engineering thermoplastic.

This semi-crystalline material has a balance of high temperature mechanical properties, chemical and steam resistance.

Click for more information on the complete line of TECAPEEK Plastics

Key Properties

High Temp
Chemical
Resistant
Hydrolysis Resistant

Limitations

Applications

Structural Parts
Oil and Gas Components
Pump, Valve and Compressor Seals and Components

Resin Trade Names

Manufacturer Trade Names

XP-96B TECAPEEK®

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Sheet Thickness .250” x 2.000” Size W X L 12.000” x 15.000” Thickness .250” to 3.000” Size W X L 10.000” x 10.000” & 13.000” x 13.000 Thickness .250” x 2.500” Size W X L 15.000” x 30.000” & 24.000” x 24.000” Rod Diameter 1.000” to 3.250” Lengths 3.000” to 6.000” L Tube Unfilled PEEK Outside Diameter 1.500” to 81.500” Lengths 3.000” to 6.000” L Filled PEEK Outside Diameter 1.500” to 8.000” Lengths 3.000” to 8.000” Outside Diameter 8.250” to 81.500” Lengths 3.000” to 6.000” L Disks Diameter 3.250” to 26.000” Thickness .500” to 3.000”

Available Colors

Black

Safety Data Sheet

Typical Properties of XP-96B TECAPEEK ® Unfilled Black PEEK

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			PEEK Polyetheretherketone
Trade Name			XP-96B TECAPEEK®
Additives			Unfilled Black
Color			Black
Manufacturer			Ensinger Special Polymers, Inc.
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	lb/in³	0.049
	ASTM D792	lb/in³	1.36
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.05
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	13,800
Tensile Modulus	ASTM D638	psi	770,000
Tensile Elongation at Break	ASTM D638	%	4.5
Flexural Strength	ASTM D790	psi	22,300
Flexural Modulus	ASTM D790	psi	700,000
Compressive Strength	ASTM D695	psi	19,300
Compressive Modulus	ASTM D695	psi	360,000
Hardness	ASTM D785		Shore D 89 / Rockwell M 101
IZOD Impact-Notched	ASTM D256	ft-lb/in	0.58
THERMAL
Property	Test	Unit of Measure	Value
Melting Point Temp	ASTM D3418	°C	343
	ASTM D3418	°F	649
Max Continuous Operating Temp		°C	249
		°F	480
Minimum Operating Temp		°C	-60
		°F	-76
OTHER
Description			Value
Relative Cost			$$$$$$

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECAPEEK® is a registered trademark of Ensinger.

1-800-444-3485

XP-96B TECAPEEK ® Unfilled Black PEEK

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.