XP-111 TECAPEEK ® 50% Carbon Fiber Filled PEEK

Compliance Info

Slide 1 of 1, currently active

General Info

TECAPEEK 50% Carbon Fiber Reinforced PEEK

Click for more information on the complete line of TECAPEEK Plastics

Key Properties

High Strength
High Temp
High Modulus
Thermally Conductive
Electrically Conductive

Limitations

Applications

Bushings and Bearings
High Strength Structural Components

Resin Trade Names

Manufacturer Trade Names

XP-111 TECAPEEK®

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Sheet Thickness .250” x 2.000” Size W X L 12.000” x 15.000” Thickness .250” to 3.000” Size W X L 10.000” x 10.000” & 13.000” x 13.000 Thickness .250” x 2.500” Size W X L 15.000” x 30.000” & 24.000” x 24.000” Rod Diameter 1.000” to 3.250” Lengths 3.000” to 6.000” L Tube Unfilled PEEK Outside Diameter 1.500” to 81.500” Lengths 3.000” to 6.000” L Filled PEEK Outside Diameter 1.500” to 8.000” Lengths 3.000” to 8.000” Outside Diameter 8.250” to 81.500” Lengths 3.000” to 6.000” L Disks Diameter 3.250” to 26.000” Thickness .500” to 3.000”

Available Colors

Black

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of XP-111 TECAPEEK ® 50% Carbon Fiber Filled PEEK

DETAIL
Description			Value
Material Type			Semi-Crystalline Thermoplastic
Chemical Name			PEEK Polyetheretherketone
Trade Name			XP-111 TECAPEEK®
Additives			50% Carbon Fiber Reinforced
Color			Black
Manufacturer			Ensinger Special Polymers, Inc.
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.49
	ASTM D792	lb/in³	0.054
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.13
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	18,700
Tensile Modulus	ASTM D638	psi	2,600,000
Tensile Elongation at Break	ASTM D638	%	1.1
Flexural Strength	ASTM D790	psi	31,000
Flexural Modulus	ASTM D790	psi	2,600,000
Compressive Strength	ASTM D695	psi- 10% Deformation	40,000
Compressive Modulus	ASTM D695	psi	710,000
Hardness	ASTM D785	Rockwell M	110
IZOD Impact-Notched	ASTM D256	ft-lb/in	1.39
THERMAL
Property	Test	Unit of Measure	Value
Melting Point Temp	DSC	°C	342
	DSC	°F	649
Max Continuous Operating Temp		°C	249
		°F	480
Minimum Operating Temp		°C	-60
		°F	-76
ELECTRICAL
Property	Test	Unit of Measure	Value
Surface Resistivity	ASTM D257	ohm/square	< 10^4
OTHER
Description			Value
Relative Cost			$$$$$$

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECAPEEK® is a registered trademark of Ensinger.

1-800-444-3485

XP-111 TECAPEEK ® 50% Carbon Fiber Filled PEEK

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.