1-800-444-3485

Duratron ® T 7530 Carbon Filled PAI Compression Molded

Compliance Info

Slide 1 of 1, currently active

General Info

Compression Molded Duratron® T7530 PAI is 30% carbon fiber reinforced. It offers exceptional stiffness in non-abrasive wear applications.

Its composition is the same as Duratron® T7130 PAI and is used when larger shapes are required.

Duratron® T Grades are molded from Torlon® resin using Mitsubishi Chemical Advanced Material's proprietary processing technologies.

Click For More Information on the Complete Line of Duratron® T PAI Products

Key Properties

Thermal Performance to 500°F (260°C) Continuous Use Temp
Carbon Reinforced Grade
Higher Strength and Modulus
Exceptional Creep Resistance
Good Fatigue Resistance
Excellent Dimensional Stability
Lowest Coefficient of Linear Thermal Expansion CLTE of PAI Grades – Close to Steel
Compression Molded Grade Offers Larger Shapes & Thicker Cross Sections

Limitations

Duratron® T PAI Grade Materials have a relatively high moisture absorption rate, parts used in high temperature service or made to tight tolerances should be kept dry prior to installation.
Thermal shock resulting in deformation can occur if moisture laden parts are rapidly exposed to temperatures above 400°F (205° C).
Chemical Resistance to Strong Bases, Steam and Some High Temperature Acids

Applications

Aerospace Components
Gears
High Strength High Pressure Structural Components
Housings
Impellers
Metal Replacement
Oil & Gas Components
Pistons
Shrouds
Sliding Compressor & Pump Vanes

Resin Trade Names

Torlon® 7530

Manufacturer Trade Names

Duratron® T7530 PAI

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

Black

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of Duratron ® T 7530 Carbon Filled PAI Compression Molded

DETAIL
Description			Value
Material Type			Imidized Amorphous Thermoplastic
Chemical Name			PAI Polyamide-imide
Trade Name			Duratron® T7530 PAI
Additives			Carbon Filled
Color			Black
Manufacturer			Mitsubishi Chemical Advanced Materials
PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.51
	ASTM D792	lb/in³	0.055
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.3
Water Absorption, Saturation, Immersion	ASTM D570	% by wt.	1.5
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	12,500
Tensile Modulus	ASTM D638	psi	730,000
Tensile Elongation at Break	ASTM D638	%	2.6
Flexural Strength	ASTM D790	psi	18,000
Flexural Modulus	ASTM D790	psi	1,000,000
Compressive Strength	ASTM D695	psi	43,000
Compressive Modulus	ASTM D695	psi	971,000
Hardness	ASTM D785	NA	Rockwell E90
IZOD Impact-Notched	ASTM D256	ft-lb/in	0.7
Dynamic Coefficient of Friction	QTM 55007 (Dry vs Steel)	NA	0.22
Wear K Factor	QTM 55010	in³-min/ft-lbs-hr	112
Limiting PV	QTM 55007	psi-fpm	43,000
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./°F	0.9
Max Continuous Operating Temp		°C	260
		°F	500
Minimum Operating Temp		°C	-200
		°F	-328
Thermal Conductivity	ASTM C117	BTU-in/ft²-hr-°F	3.6
Flammability Rating	UL94	NA	V-0
COMPLIANCE
Description			Value
FDA			No
USDA			No
NSF			No
3-A Dairy			No
Canadian Food Inspection Agency			No
USP Class VI			No
OTHER
Description			Value
UV Resistant			Yes
Relative Cost			$$$$$$$
Machinability			8

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

Duratron® is a registered trademark of Mitsubishi Chemical Advanced Materials (MCAM). Torlon® is a registered trademark of Solvay Advanced Polymers.