1-800-444-3485

TECAFORM ® AD HPV13 ACETAL

Compare Go To Comparison Add Additional Products For Comparison

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

Unit of Measure

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.

3. Please Select Dimensions *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

3. Please Select Length *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

General Info

TECAFORM® HPV13 is a brown homopolymer acetal with an internal PTFE lubricant. Its low coefficient of friction, excellent PV values, toughness, wear resistance, and machinability make it an exceptional material for use in many industrial and military components with moving parts.

Click for more information on the complete line of TECAFORM Acetals

Key Properties

  • Lower cost alternative to Delrin AF blend
  • No stick slip
  • Low coefficient of friction
  • Good dimensional stability
  • Superior wear resistance
  • Superior resistance to repeated impacts and creep
  • Self-lubricating
  • The use of TECAFORM™ HPV 13 can eliminate costly lubricants, reduce maintenance costs and product contamination.
  • Excellent machinability
  • Complies with FDA regulation 21CFR 177.2480 and may be used in contact with food up to 150 F on a repeated use basis, except those foods containing more than 15% alcohol. Delrin® AF does not.

Limitations

  • Wear Resistance in Dry Environments
  • Poor Resistance to Strong Acids and Alkalies
  • Slightly Lower Mechanical Properties than Homopolymer Acetal

Applications

  • Bushings & Bearings
  • Thrust Washers
  • Wear Components
  • Wear Strips

Resin Trade Names

Manufacturer Trade Names

  • TECAFORM® AD HPV13

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

  • Brown

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of TECAFORM ® AD HPV13 ACETAL

DETAIL
Description Value
Material Type Semi-Crystalline Thermoplastic
Chemical Name POM Polyoxymethylene Acetal Copolymer
Trade Name TECAFORM® AD HPV13
Additives PTFE Powder
Color Brown
Manufacturer Ensinger
PHYSICAL
Property Test Unit of Measure Value
Density ASTM D792 g/cm³ 1.5
  ASTM D792 lb/in³ 0.054
Water Absorption, 24 hrs, Immersion ASTM D570 % by wt. 0.12
MECHANICAL
Property Test Unit of Measure Value
Tensile Strength ASTM D638 psi 7,700
Tensile Modulus ASTM D638 psi 380,000
Tensile Elongation at Break ASTM D638 % 10
Flexural Strength ASTM D790 psi 13,000
Flexural Modulus ASTM D790 psi 450,000
Compressive Strength ASTM D695 psi 13,000
Compressive Modulus ASTM D695 psi 450,000
Hardness ASTM D785 NA Rockwell R118
IZOD Impact-Notched ASTM D256 ft-lb/in 1.5
Static Coefficient of Friction NA 0.07
Dynamic Coefficient of Friction Dynamic, 40 PSI, 50 FPM NA 0.12
Limiting PV psi-fpm 12,000
THERMAL
Property Test Unit of Measure Value
Coefficient of Linear Thermal Expansion ASTM D696 x 10-5 in./in./°F 5.1
Heat Deflection Temp ASTM D648 °C at 264 psi 118
  ASTM D648 °F at 264 psi 244
Melting Point Temp ASTM D3418 °C 175
  ASTM D3418 °F 347
Max Continuous Operating Temp °C 85
  °F 185
Minimum Operating Temp °C -50
  °F -58
COMPLIANCE
Description Value
FDA Yes
USDA Yes
NSF No
3-A Dairy No
Canadian Food Inspection Agency No
USP Class VI No
OTHER
Description Value
ASTM Shape Spec D6100 S-POM0211 (Only >0.062" Thickness)
Relative Cost $$$$
Machinability 1

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

TECAFORM® is a registered trademark of Ensinger. DELRIN® is a registered trademark of DuPont.

Related Products

Feedback
Original text
Rate this translation
Your feedback will be used to help improve Google Translate