1-800-444-3485

Nylatron ® LIG Type 6 Nylon

Compare Go To Comparison Add Additional Products For Comparison

-

1. Select Shape

2. Please Select Thickness

2. Please Select Diameter

2. Please Select Outer Diameter

2. Please Select Type & Size

Unit of Measure

In order to provide an accurate quote for your part, you'll need to provide some information through our custom quote request form.

3. Please Select Dimensions *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

3. Please Select Length *

Sheet widths and lengths are cut to nominal dimensions; Rod lengths are also cut to nominal dimensions. Nominal cuts can be undersized by up to .200 inches. Cut-to-size items are non-refundable. See our return policy for more details. Contact us if you need precision cut sizes.

Unit Price

$662.13

Subtotal

$662.13

Note: There is a $50.00 line item minimum on all orders.

General Info

Nylatron® LIG (Lubricated Industrial Grade) Polyamide Type 6 combines the toughness of cast PA6 with an oil-based lubricant that is encapsulated within the nylon matrix. It increases the load bearing performance of the material when compared to unfilled nylons and reduces the coefficient of friction. It is an ideal material for industrial application in conveying and processing industries.

Click for more information on the complete line of Nylatron Nylon Products

Key Properties

  • Low Coefficient of Friction (COF)
  • Higher Toughness
  • Higher Limiting Pressure Velocity than Unfilled
  • Can Be Cast as Finished Parts and Near Net Shapes (Nylon 6)

Limitations

  • High Moisture Absorption
  • Limited Resistance to Strong Acids & Alkalies Note - Nylons can absorb up to 7% (by weight) water under high humidity or submerged in water. This can result in dimensional changes up to 2% and a corresponding reduction of physical properties. Proper design techniques can frequently compensate for this factor.

Applications

  • Bushings & Bearings
  • Conveyor Wear Components
  • Gears
  • Metal Replacement Applications
  • Pulleys
  • Roller Wheels
  • Sheaves
  • Wear Pads
  • Bearing & Wear Parts for a Wide Range Automated Equipment
  • Valve Seats & Seals

Resin Trade Names

Manufacturer Trade Names

  • Nylatron® LIG

Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, film and custom profiles and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your specification calls for a specific resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your specification or suggest an equal. If you require a specific resin or brand it must be specified at the time of order.

Available Sizes

Available Colors

  • Green

Safety Data Sheet

Download Safety Data Sheet

Typical Properties of Nylatron ® LIG Type 6 Nylon

Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for fitness in use and strongly recommends the user validate any plastic, machined part, or product in a specific application for fitness in use.

Nylatron® is a registered trademark of Quadrant Engineering Plastic Products.

Related Products

Feedback