|
NOTE: This material is no longer readily available from the manufacturer.
Contact Boedeker Plastics for equivalent or replacement material options. |
GENERAL DESCRIPTION Polypropylene is an economical material that offers a combination of outstanding physical, chemical, mechanical, thermal and electrical properties not found in any other thermoplastic. By adding special conductive materials to the resin, the conductivity of polypropylene is increased to control static electricity formation or conduction.
These additives may be in the form of non-carbon alloys, carbon powder, or carbon fibers. Some properties of the original polypropylene are modified by the addition of fillers, but chemical resistance, strength, and manufacturability remain generally the same. Static-dissipative materials are available in natural and black colors, conductive material is almost always black in color.
( see also Standard Polypropylene Specifications )
Static Dissipative / Anti-Static (SD) :
Resistivity generally between 107 and 1012 ohms per square.
Initial electrostatic charges are suppressed.
Conductive (CN) :
Resistivity generally between 103 and 106 ohms per square.
No initial charge, provides path for charge to bleed off.
|
TYPICAL PROPERTIES of PROPYLUX® STATIC-CONTROL POLYPROPYLENE | ||||
| ASTM or UL test | Property | Propylux® SD-A | Propylux® CN-P | Propylux® CN-F |
| - | Classification | Anti-Static | Conductive | Conductive |
| - | Filler Material | Non-Carbon Alloy | Carbon Powder | Carbon Fiber |
| PHYSICAL | ||||
| D792 | Density (lb/in³) (g/cm³) |
0.034 0.94 |
0.036 1.00 |
0.034 0.95 |
| D570 | Water Absorption, 24 hrs (%) | <1.0 | 0.02 | 0.01 |
| MECHANICAL | ||||
| D638 | Tensile Strength (psi) | 4,400 | 2,600 | 6,000 |
| D638 | Tensile Modulus (psi) | - | - | - |
| D638 | Tensile Elongation at Yield (%) | 200 | 25 | 5 |
| D790 | Flexural Strength (psi) | 6,200 | 3,000 | 8,000 |
| D790 | Flexural Modulus (psi) | 200,000 | 80,000 | 620,000 |
| D695 | Compressive Strength (psi) | - | - | - |
| D695 | Compressive Modulus (psi) | - | - | - |
| D785 | Hardness, Rockwell R | - | - | - |
| D256 | IZOD Notched Impact (ft-lb/in) | 1.4 | NoBreak | 1.0 |
| THERMAL | ||||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) |
- | - | - |
| D648 | Heat Deflection Temp (°F / °C) at 66 psi at 264 psi |
- 135 / 57 |
- 125 / 52 |
- 215 / 102 |
| D3418 | Melting Temperature (°F / °C) | 320 / 160 | 320 / 160 | 320 / 160 |
| - | Max Operating Temp (°F / °C) | 180 / 82 | 180 / 82 | 180 / 82 |
| C177 | Thermal Conductivity (BTU-in/ft²-hr-°F) (x 10-4 cal/cm-sec-°C) |
- - |
- - |
- - |
| UL94 | Flammability Rating | HB | HB | HB |
| ELECTRICAL | ||||
| D257 | Surface Resistivity (ohms/sq) | 109-1011 | 102-106 | 102-106 |
| D257 | Volume Resistivity (ohm-cm) at 73°F, 50% RH | 109-1011 | 102-106 | 102-106 |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.PROPYLUX is a registered trademark of Westlake Plastic Company
All values at 73°F (23°C) unless otherwise noted.
©
Copyright Boedeker Plastics, Inc.
2008