|
NOTE: This material is no longer readily available from the manufacturer.
Contact Boedeker Plastics for equivalent or replacement material options. |
GENERAL PROPERTIES
HTP 800 is a clear PVC based material for use as windows and doors in cleanrooms and related equipment. Notable properties include excellent light transmission, chemical resistance, and flame resistance. HTP 800 is UL94 V-0 rated and meets the Factory Mutual Standard (FM4910) for flame spread, smoke development, and corrosion resistance (FM4910 listing JI#3006348).
HTP 800 is available in sheets from 3 to 10mm (.118 to .394") thick ONLY. Standard sheet size is 1 x 2 meters (39.4 x 78.7") ONLY.
APPLICATIONS • Fluid handling • Semiconductor equipment • Fire safety components • Clear windows & doors
KEY PROPERTIES • Excellent clarity and 69% light transmittance - no haze • Chemical resistance • Stiffness • Contains no lead (Pb), heavy metals or other EPA SARA 313 reportable ingredients • Most cost-effective FM4910 clear plastic available
|
TYPICAL PROPERTIES of HTP 800 CLEAR PVC | ||||
| ASTM or UL test | Property | HTP 800 Clear PVC | ||
| PHYSICAL | ||||
| D792 | Density (lb/in³) (g/cm³) |
0.051 1.41 |
||
| D570 | Water Absorption, 24 hrs (%) | 0.016 | ||
| MECHANICAL | ||||
| D638 | Tensile Strength (psi) | 8,700 | ||
| D638 | Tensile Modulus (psi) | - | ||
| D638 | Tensile Elongation at Break (%) | 45 | ||
| D790 | Flexural Strength (psi) | 14,000 | ||
| D790 | Flexural Modulus (psi) | 435,500 | ||
| D695 | Compressive Strength (psi) | - | ||
| D695 | Compressive Modulus (psi) | - | ||
| D785 | Hardness, Rockwell | M95 / R124 | ||
| D256 | IZOD Notched Impact (ft-lb/in) | 1.4 | ||
| THERMAL | ||||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) |
- | ||
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
170 / 76 |
||
| D3418 | Melting Temp (°F / °C) | - | ||
| - | Max Operating Temp (°F / °C) | 200 / 93 | ||
| C177 | Thermal Conductivity (BTU-in/ft²-hr-°F) (x 10-4 cal/cm-sec-°C) |
- - |
||
| UL94 | Flammability Rating | V-0 | ||
| ELECTRICAL | ||||
| D149 | Dielectric Strength (V/mil) short time, .001" thick | 279 | ||
| D150 | Dielectric Constant at 1 MHz | - | ||
| D150 | Dissipation Factor at 1 MHz | - | ||
| D257 | Volume Resistivity (ohm-cm)at 50% RH | - | ||
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
©
Copyright Boedeker Plastics, Inc.
2008