GENERAL PROPERTIES
Corzan ® 4910 CPVC is a new material developed for use in the construction of wet benches and other cleanroom equipment for the semiconductor industry. It is UL94 V-0 rated and meets the FM Global (formerly Factory Mutual) Standard (FM4910) for flame spread, smoke development, and corrosion resistance.
The advantages of Corzan ® 4910 CPVC are its excellent balance of properties related to strength, weldability and chemical resistance, as well as outstanding performance in flame and smoke. Corzan is easy to fabricate and use. It has excellent mechanical strength and provides resistance to most semiconductor processing chemistries, including both strong and weak acids and bases, salts, and aliphatic hydrocarbons.
Corzan ® 4910 is available in sheet form only from .250" to .750" thicknesses in 48" x 96" sheet sizes, and thicknesses of 1" and above in 48" square sheet sizes. It is NATURAL (ivory-white) in color.
APPLICATIONS • Wet benches • Cleaning tools • Point source scrubbers • Ducting systems • Fluid handling • Other semiconductor equipment • Fire safety components
KEY PROPERTIES • High purity • Flame resistance • Impact resistance • Excellent weldability • Low permeability • UL94 V-0 and FM 4910 listed
|
TYPICAL PROPERTIES of CORZAN ® 4910 CPVC | ||||
| ASTM or UL test | Property | Corzan 4910 CPVC | ||
| PHYSICAL | ||||
| D792 | Density (lb/in³) (g/cm³) |
0.056 1.56 |
||
| D570 | Water Absorption, 24 hrs (%) | - | ||
| MECHANICAL | ||||
| D638 | Tensile Strength (psi) | 7,900 | ||
| D638 | Tensile Modulus (psi) | 410,000 | ||
| D638 | Tensile Elongation at Break (%) | - | ||
| D790 | Flexural Strength (psi) | 14,500 | ||
| D790 | Flexural Modulus (psi) | 457,000 | ||
| D695 | Compressive Strength (psi) | - | ||
| D695 | Compressive Modulus (psi) | - | ||
| D785 | Hardness, Rockwell | - | ||
| D256 | IZOD Notched Impact (ft-lb/in) | 1.5 | ||
| THERMAL | ||||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) |
- | ||
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
212 / 100 |
||
| D3418 | Melting Temp (°F / °C) | - | ||
| - | Max Operating Temp (°F / °C) | 200 / 93 | ||
| C177 | Thermal Conductivity (BTU-in/ft²-hr-°F) (x 10-4 cal/cm-sec-°C) |
- - |
||
| UL94 | Flammability Rating | V-0 | ||
| ELECTRICAL | ||||
| D149 | Dielectric Strength (V/mil) short time, .001" thick | - | ||
| D150 | Dielectric Constant at 1 MHz | - | ||
| D150 | Dissipation Factor at 1 MHz | - | ||
| D257 | Volume Resistivity (ohm-cm)at 50% RH | - | ||
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.CORZAN is a registered trademark of Noveon, Inc.
All values at 73°F (23°C) unless otherwise noted.
©
Copyright Boedeker Plastics, Inc.
2008