BPI Home Page
|
|
other Kydex grades
|
| Boedeker Plastics, Inc. 1-800-444-3485 |
 |
| Kydex ® |
Outperforms conventional acrylic/PVC and FR-ABS thermoplastics at competitive costs. | | 200 | | GENERAL PURPOSE GRADE | General Information
KYDEX 200 is a proprietary thermoplastic sheet that is cost competitive with other thermoplastics while providing excellent extensibility, good impact resistance, and excellent solvent resistance. Based on independent laboratory testing it meets the requirements of UL Std 94 V-0 in all gauges. It has 10 ft-lbs./in (534 J/m) of Notched Izod impact resistance.
Features
Kydex 200 is available in seven gauges from .028" (0.71 mm) and up in eight distinctive textures and limited colors.
Delivers performance advantages at an effective cost.
It is among the most rigid of thermoforming materials as demonstrated by its high modulus of elasticity.
Particularly effective for pressure forming and/or where the part is going to be painted.Meets the requirements of 94 V-0 in all gauges as tested by an independent lab.
THERMOFORMABILITY: Excellent forming properties result in uniform wall thicknesses and crisp detail, plus easy machining and fabricating using conventional methods further expanding finished part possibilities.
RIPH: KYDEX is endorsed by the Royal Institute of Public Health for conformance to the standard of Hygienic Merit
|
| | Property | Test Method | Typical Value 1 | | Specific Gravity | ASTM D-792 | 1.35 | | Tensile Strength | ASTM D-638 | 6100 psi
(42 MPa) | | Flexural Strength | ASTM D-790 | 9100 psi
(63 MPa) | | Modulus of Elasticity, psi | ASTM D-790 | 320,000 psi
(2206 MPa) | | Notched Izod Impact Resistance@73° F (23° C) | ASTM D-256 | 10 ft-lbs./in
(534 J/m) | | Rockwell Hardness (R Scale) | ASTM D-785 | 94 | | Heat Deflection Temperature (HDT) @ 264 psi, annealed °F | ASTM D-648 | 173° F
(78° C) | | Flammability: Independent Test Lab | UL Standard 94 | V-0 | | Forming Temperature | | 325-390° F
(163-200° C) | | DIN 4102-B1 | | Pass at .7mm
325-390° F
(163-200° C) | 1
All Values are based upon 0.125" (3.12 mm) sheet unless otherwise specified.
Not intended for specification purposes.
|
|
|
| Applications |
| Aircraft interior components |
| Equipment Housings |
| Medical Products |
| Miscellaneous Applications | |
| Certifications |
| UL Std. 94 V-0 (independent lab) |
| FAR 25.853 (a) 60s, 12s (Aircraft Rating) |
| MVSS 302 (Mass Transit Rating) | |
| Textures |
| P-F LEVANT |
| P-H SEVILLE |
| P-C LEVEL HAIRCELL |
| P-1 HAIRCELL | |
| Thicknesses |
| .028" (0.7mm) |
| .040" (1.0mm) |
| .060"(1.5mm) |
| .080"(2.0mm) |
| .093"(2.4mm) |
| .125"(3.2mm) |
| .156"(4.0mm) |
| .187"(4.8mm) |
| .250"(6.4mm) |
| .312"(7.9mm) |
| .325"(8.3mm) |
| .375"(9.6mm) |
| .425"(10.8mm) |
| .500"(12.7mm) | |
| Colors and Patterns |
| Chocolate |
Ivory |
Beige |
Cadet Blue |
| Pinstripe |
Pewter Gray |
Fluorescents |
Custom-matched colors (including cadet blue) |
| Over 2000 custom colors |
|
NOTE: The information contained herein are typical values intended for
reference and comparison purposes only. They should NOT be used as a basis
for design specifications or quality control.
All values at 73°F (23°C) unless otherwise noted.
KYDEX® is a registered trademark of Kleerdex Company
|
Boedeker Plastics, Inc.
904 West 6th Street, Shiner, Texas 77984 USA
USA TOLLFREE : 1-800-444-3485
Phone: 1-361-594-2941
Fax: 1-361-594-2349
E-Mail: bpi@boedeker.com
©
Copyright Boedeker Plastics, Inc.
|