BPI Home Page
|
|
other Kydex grades
|
| Boedeker Plastics, Inc. 1-800-444-3485 |
 |
| Kydex ® |
Granite Series
| | 130 | | DECORATIVE GRANITE-LOOK THERMOPLASTIC SHEET | General Information
A new dimension to thermoplastic sheet is now available. KYDEX 130 Granite Series offers a look that is unique to most thermoplastic materials. This decorative product performs equally well as a flat sheet or as a 3-dimensional thermoformed part. It is available in 5 colors: green, black, navy, red/black, and rosetone. It is Underwriter's Laboratories Inc. recognized UL 94 V-0 and 5V in all gauges and UL Classified Class I/A for non-wallcovering building product applications.
Features
Superior Formability: For deep or hard to form parts or where good finished detail is required, KYDEX 130 is unsurpassed.
Rigidity: KYDEX 130 is more rigid than most other thermoplastics resulting in parts that are stiffer and that will deform less when loaded.
Chemical Resistance: KYDEX meets the highest standards for chemical resistance.
Fire Retardancy: KYDEX 130 is recognized by Underwriter's Laboratories® for Std 94 V-0 and 5V in all gauges. It meets FAR 25.853(a) vertical burn requirements for use in aircraft as thermoformed parts.
Thermoformability: KYDEX 130 is easy to fabricate and thermoform and since the color is integral throughout the sheet you don't have to worry about the cap thinning out or the substrate bleeding through.
RIPH: KYDEX is endorsed by the Royal Institute of Public Health for conformance to the standard of Hygienic Merit
|
| | Property | Test Method | Typical Value 1 | | Specific Gravity | ASTM D-792 | 1.33 - 1.37 | | Tensile Strength | ASTM D-638 | 6,000 psi
(41 MPa) | | Elongation % | ASTM D-638 | 130 | | Flexural Strength | ASTM D-790 | 9000 psi
(62 MPa) | | Modulus of Elasticity | ASTM D-790 | 344,000 psi
(2,372 MPa) | |
Notched Izod Impact Resistance @ 73° F (23° C)
| ASTM D-256 | 3.5 ft-lbs/in
(187 J/m) | |
Rockwell Hardness (R Scale)
| ASTM D-785 | 101 | |
Heat Deflection Temperature (HDT) @ 264 psi (1.82 MPa) annealed
| ASTM D-648 | 170° F
(77° C) | | Flammability: Underwriters Lab Component Recognition | UL Standard 94
2 | V-0, 5V 3 | | Federal Aviation Administration | Federal Standard 25.853(a) | Pass 3 | 1All Values are based upon 0.125" (3.12 mm) sheet unless otherwise specified.
2Underwriter's Laboratories Inc., File E115252
3All gauges .028" (0.71mm) and above.
Not intended for specification purposes.
|
|
|
| Applications |
| Equipment Housings |
| Medical Products |
| Kiosk Housings |
| Miscellaneous Applications | |
| Certifications |
| UL Std. 94 V-0 (listed) |
| UL Std. 95 5V (listed) |
| FAR 25.853 (d) ASU, RHR (aircraft rating) |
| Class I/A, UL Std. 723 (independent lab) (GAUGES <= 0.060") | |
| Textures |
| P-E SMOOTH NAP |
| P-7 STIPPLE |
| P-F LEVANT |
| P-H SEVILLE |
| P-C LEVEL HAIRCELL |
| P-3 VELOUR MATTE |
| P-8 SUEDE |
| P-1 HAIRCELL |
| P-G CONTOUR | |
| Thicknesses |
| .028" (0.7mm) |
| .040" (1.0mm) |
| .060"(1.5mm) |
| .080"(2.0mm) |
| .093"(2.4mm) |
| .125"(3.2mm) |
| .156"(4.0mm) |
| .187"(4.8mm) |
| .250"(6.4mm) |
| .312"(7.9mm) |
| .325"(8.3mm) |
| .375"(9.6mm) |
| .425"(10.8mm) |
| .500"(12.7mm) | |
| Colors and Patterns |
| Granite Rosestone |
Granite Red/Black |
Granite Green |
Granite Navy |
| Granite Black | | |
NOTE: The information contained herein are typical values intended for
reference and comparison purposes only. They should NOT be used as a basis
for design specifications or quality control.
All values at 73°F (23°C) unless otherwise noted.
KYDEX® is a registered trademark of Kleerdex Company
|
Boedeker Plastics, Inc.
904 West 6th Street, Shiner, Texas 77984 USA
USA TOLLFREE : 1-800-444-3485
Phone: 1-361-594-2941
Fax: 1-361-594-2349
E-Mail: bpi@boedeker.com
©
Copyright Boedeker Plastics, Inc.
2008
|