BPI Home Page
|
|
other Kydex grades
|
| Boedeker Plastics, Inc. 1-800-444-3485 |
 |
| Kydex ® |
KYDEX 115 sheet is a tough, Class I/A sheet with higher stiffness for applications such as Ceiling Panels that demand this amount of rigidity.
| | 115 | | HIGH RIGIDITY SHEET FOR CEILING PANELS | General Information
KYDEX 115 high rigidity fire rated sheet is a non-porous, tough, chemical resistant, Class I/A rated sheet designed for applications like ceiling panels that require a high rigidity for sag-resistance. The material is monolithic, contains no fibers, and will not crack, chip, flake, or deteriorate over time. Available in full sheets and in custom sizes to be used in ceiling grid systems, KYDEX 115 is approved for use in Class 10 rated cleanrooms, as tested according to Fed-Std. 209D.
Features
Fire Retardancy: KYDEX 115 meets the criteria for flame spread and smoke development that determines Class I/A compliance using ASTM E-84 methodology.
Durability: KYDEX 115 is ideal for applications such as ceiling panels where the product must be routinely removed and/or cleaned for maintenance. It provides superior impact protection and will not chip, crack, or flake. Color is integral throughout each sheet.
Cleanability: KYDEX 115 has excellent chemical resistance allowing for the removal of tougher stains with stronger cleaning agents without damaging the surface of the sheet.
USDA Approved: In white and beige, KYDEX 115 is approved for incidental food contact for use in USDA inspected meat and poultry plants.
Thermoformability: KYDEX 115 sheet can be thermoformed and fabricated for use in both 2-dimensional and 3-dimensional parts. It can be routed, drilled, and cut using standard wood and/or metal working equipment.
RIPH: KYDEX is endorsed by the Royal Institute of Public Health for conformance to the standard of Hygienic Merit
|
| | Property | Test Method | Typical Value 1 | | Specific Gravity | ASTM D-792 | 1.47 | | Tensile Strength | ASTM D-638 | 5750 psi
(39.6 MPa) | | Flexural Strength | ASTM D-790 | 10,200 psi
(70.3 MPa) | | Modulus of Elasticity | ASTM D-790 | 347,000 psi
(2,392 MPa) | |
Notched Izod Impact Resistance @ 73° F (23° C)
| ASTM D-256 | 3-5 ft-lbs/in
(160 -267 J/m) | |
Rockwell Hardness (R Scale)
| ASTM D-785 | 107 | |
Water Absorption %
|
24 hours @73°F (23° C)
| 0.06 | |
Water Absorption %
|
7 days @73°F (23° C)
| 0.15 | |
Heat Deflection Temperature (HDT) @ 264 psi (1.82 MPa) annealed
| ASTM D-648 | 178° F
(81° C) | | Flammability: Flame Spread Smoke Developed | ASTM E-84 (Free-Standing) | 25 440 (Class I/A) | | Clean Room Class | Federal Standard 209D | Class 10 | 1All Values are based upon 0.125" (3.12 mm) sheet unless otherwise specified.
2Based on Independent Lab testing
Not intended for specification purposes.
|
|
|
| Applications |
| Clean room walls and ceilings |
| Food Processing |
| Miscellaneous Applications | |
| Certifications |
| Class I/A, UL Std. 723 (independent lab) | |
| Textures |
| P-E SMOOTH NAP |
| P-7 STIPPLE |
| P-F LEVANT |
| P-H SEVILLE |
| P-C LEVEL HAIRCELL |
| P-3 VELOUR MATTE |
| P-8 SUEDE |
| P-1 HAIRCELL |
| P-G CONTOUR | |
|
| Colors and Patterns |
| Polar White |
Beige |
Custom-matched colors (including white white) | |
NOTE: The information contained herein are typical values intended for
reference and comparison purposes only. They should NOT be used as a basis
for design specifications or quality control.
All values at 73°F (23°C) unless otherwise noted.
KYDEX® is a registered trademark of Kleerdex Company
|
Boedeker Plastics, Inc.
904 West 6th Street, Shiner, Texas 77984 USA
USA TOLLFREE : 1-800-444-3485
Phone: 1-361-594-2941
Fax: 1-361-594-2349
E-Mail: bpi@boedeker.com
©
Copyright Boedeker Plastics, Inc.
2008
|
|