BPI Home Page

Boedeker.com other Kydex grades

Boedeker Plastics, Inc.       1-800-444-3485
Kydex ®

NOTE: This material is no longer available from the manufacturer.
Contact Boedeker Plastics for equivalent or replacement materials.

Offering superior impact resistance and flame resistance in an anti-static sheet.

100AS   [ discontinued in 2007 ]
ANTI-STAT SHEET
General Information
KYDEX 100AS, a proprietary alloy sheet, brings new dimensions to anti-static protective materials in: formability, rigidity, breakage resistance, and chemical resistance. This sheet is available in standard and custom gauges from .028" (.71mm) and up, in many distinctive textures and hundreds of colors. Unlike other anti-static thermoplastic sheets, KYDEX 100AS retains its anti-static properties even after thermoforming. It has a surface resistivity of 109 to 1012 Ohms/square.

Features
Anti-Static Propertries: Unlike other anti-static thermoplastic sheets, KYDEX 100AS retains its anti-static properties even after thermoforming. Also it is available in a multitude of colors.

Superior Formability: For deep or hard to form parts or where good finished detail is required, KYDEX 100AS is unsurpassed.

Breakage Resistance: With a high notched Izod Impact resistance, KYDEX 100 AS offers superior resistance to breakage.

Chemical Resistance: KYDEX meets the highest standard for chemical resistance

Thermoformability: Excellent forming properties results in uniform wall thicknesses and crisp detail, plush easy machining and fabricating using conventional methods, further expanding finished part possibilities.

RIPH: KYDEX is endorsed by the Royal Institute of Public Health for conformance to the standard of Hygienic Merit
PropertyTest MethodTypical Value 1
Specific GravityASTM D-7921.33
Tensile StrengthASTM D-6385780 psi
(35-41 MPa)
Flexural ModulusASTM D-7909,780 psi
(62-69 MPa)
Modulus of ElasticityASTM D-790347,000 psi
(2206-2344 MPa)
Notched Izod Impact Resistance @ 73° F (23° C)ASTM D-25616 ft-lbs/in
(846 J/m)
Surface Resistivity, Ohms/squareASTM D-257109 -1012
Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealedASTM D-648 167° F
(67.2° C)
Flammability: Underwriter's Lab. Component Recognition UL Standard 94
2
V-0 > 0.038"
(1 mm)
Forming Temperature 325-390° F
(163-200° C)
1All Values are based upon 0.125" (3.12 mm) sheet unless otherwise specified.
2Underwriter's Laboratories Inc., File E115252
Not intended for specification purposes.


Applications
 Equipment Housings
 Electrical Equipment components
 Miscellaneous Applications
Certifications
 UL Std. 94 V-0 (independent lab)
Textures
 P-E SMOOTH NAP
 P-7 STIPPLE
 P-F LEVANT
 P-H SEVILLE
 P-A SMOOTH
 P-C LEVEL HAIRCELL
 P-3 VELOUR MATTE
 P-8 SUEDE
 P-1 HAIRCELL
 P-G CONTOUR
Thicknesses
 .028" (0.7mm)
 .040" (1.0mm)
 .060"(1.5mm)
 .080"(2.0mm)
 .093"(2.4mm)
 .125"(3.2mm)
 .156"(4.0mm)
 .187"(4.8mm)
 .250"(6.4mm)
 .312"(7.9mm)
 .325"(8.3mm)
 .375"(9.6mm)
 .425"(10.8mm)
 .500"(12.7mm)

Colors and Patterns
 Calcutta Black  Black  Chocolate  Pastel Blue
 Cabernet  Dusty Rose  Orange  Bordeaux
 Cocoa  Misty Mauve  Polar White  Angora
 Sandy Beach  Daybreak  Snowflake  Montery
 Ivory  Red  Rooster Red  Beige
 Treasure Chest  Amethyst  Mystic Green  Peacock Blue
 Thunder  Twilight  Canyon Blue  Cadet Blue
 Buoyant Bllue  Parchment  Pinstripe  Dark Gray
 Pewter Gray  Rouge  Custom-matched colors
 Over 2000 custom colors

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. All values at 73°F (23°C) unless otherwise noted.
KYDEX® is a registered trademark of Kleerdex Company
http://www.boedeker.com/kydex-100as.htm

Boedeker Plastics, Inc.
904 West 6th Street, Shiner, Texas 77984 USA
USA TOLLFREE : 1-800-444-3485
Phone: 1-361-594-2941     Fax: 1-361-594-2349     E-Mail: info@boedeker.com

©     Copyright Boedeker Plastics, Inc.