BPI Home Page

Boedeker.com other Kydex grades

Boedeker Plastics, Inc.       1-800-444-3485
Kydex ® Offering superior performance in formability, rigidity, impact resistance, fire retardance, and chemical resistance.
100
HIGH IMPACT FIRE-RATED SHEET
General Information
Super tough, durable KYDEX 100, a proprietary alloy sheet, brings new dimensions to thermoformers in: formability, rigidity, breakage resistance, chemical resistance and fire retardancy. This high performance thermoplastic sheet is available in a wide range of standard and customer colors, textures, and sheet sizes. It is Underwriters Laboratories, Inc.® recognized for UL Std 94 V-0/5V and UL 746C and has 18 ft-lbs./in (953 J/m) Notched Izod impact resistance.

Features
Superior Formablity: For deep or hard to form parts or where good finished detail is required. KYDEX 100 is unsurpassed.

Rigidity: KYDEX 100 is more rigid than most other thermoplastics resulting in parts that will deform less when loaded.

Breakage Resistance: With a high Notched Izod impact resistance, KYDEX 100 offers unsurpassed resistance to breakage.

Chemical Resistance: KYDEX 100 meets the highest standard for chemical resistance for thermoplastic materials.

Fire Retardance: KYDEX is recognized by Underwriter's Laboratories, Inc.® for Standard 94 V-0 and 5V and UL 746C in all gauges and colors.

Thermoformability: Excellent forming properties and crisp detail, plus easy machining and fabricating using conventional methods, further expanding finished part possibilities.

Electrical Properties: KYDEX 100 exhibits a Dielectric Strength of 565 V/mil and a Dielectric Constant of 3.13 @1000 Hz, 2.78 @1 MHz, 2.46 @800MHz, 2.42 @1.9 GHz, 2.67 @ 5GHz, and 2.7 @20 GHz.

RIPH: KYDEX is endorsed by the Royal Institute of Public Health for conformance to the standard of Hygienic Merit
Property Test Method Typical Value 1
Specific Gravity ASTM D-792 1.35
Tensile Strength ASTM D-638 6,100 psi
(42 MPa)
Elongation % ASTM D-638 160
Flexural Strength ASTM D-790 9,100 psi
(63 MPa)
Modulus of Elasticity ASTM D-790 335,000 psi
(2,310 MPa)
Notched Izod Impact Resistance @ 73° F (23° C) ASTM D-256 18 ft-lbs. / in
(953 J/m)
Rockwell Hardness (R Scale) ASTM D-785 94
Coefficient of Thermal Expansion ASTM D-785 4.2x10-5° F (7.56x10-5° C)
Heat Deflection Temperature (HDT) @ 264 psi, annealed °F ASTM D-648 173 ° F
(79 ° C)
Flammability: Underwriter's Lab. Component Recognition UL Standard 94
2
V-0, 5V
3
Motor Vehicle Safety Standard MVSS 302 Pass
Federal Aviation Administration FAR 25.853(a) Pass
3
BS 476 Part 6 Class 1
BS 476 Part 7 Class 1
EC 95/28/EG Pass (1-6mm)
DIN 5510-2 .9mm (S4,ST2,SR2)
6.5mm (S4,ST2,SR2)
DIN 4102-B1 Pass at .7 mm
1 All Values are based upon 0.125" (3.12 mm) sheet unless otherwise specified.
2 Underwriter's Laboratories Inc., File E115252
3 All Gauges 0.028" (0.711 mm) and above.
Not intended for specification purposes.


Applications
 Aircraft interior components
 Mass Transit vehicle and RV interiors
 Equipment Housings
 Medical Products
 Miscellaneous Applications
Certifications
 UL Std. 94 V-0 (listed)
 UL Std. 95 5V (listed)
 UL 746C for Signage (listed)
 FAR 25.853 (a) 60s, 12s (Aircraft Rating)
 FAR 25.853 (d) ASU, RHR (aircraft rating) (null)
 MVSS 302 (Mass Transit Rating)
 ASTM E-162 Flame Spread Index (Mass Transit Rating)
Textures
 P-E SMOOTH NAP
 P-7 STIPPLE
 P-F LEVANT
 P-H SEVILLE
 P-C LEVEL HAIRCELL (null)
 P-3 VELOUR MATTE
 P-8 SUEDE
 P-1 HAIRCELL
 P-G CONTOUR
Thicknesses
 .028" (0.7mm) (null)
 .040" (1.0mm)
 .060"(1.5mm)
 .080"(2.0mm)
 .093"(2.4mm)
 .125"(3.2mm)
 .156"(4.0mm)
 .187"(4.8mm)
 .250"(6.4mm)
 .312"(7.9mm)
 .325"(8.3mm)
 .375"(9.6mm)
 .425"(10.8mm)
 .500"(12.7mm)

Colors and Patterns
 Calcutta Black  Black  Chocolate  Pastel Blue
 Cabernet  Dusty Rose  Orange  Bordeaux
 Cocoa  Misty Mauve  Polar White  Angora
 Sandy Beach  Daybreak  Snowflake  Montery
 Ivory  Red  Rooster Red  Beige
 Treasure Chest  Amethyst  Mystic Green  Peacock Blue
 Thunder  Twilight  Canyon Blue  Cadet Blue
 Buoyant Bllue  Parchment  Pinstripe  Dark Gray
 Pewter Gray  Rouge  Fluorescents  Custom-matched colors
 Over 2000 custom colors

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. All values at 73°F (23°C) unless otherwise noted.
KYDEX® is a registered trademark of Kleerdex Company
Boedeker Plastics, Inc.
904 West 6th Street, Shiner, Texas 77984 USA
USA TOLLFREE : 1-800-444-3485
Phone: 1-361-594-2941     Fax: 1-361-594-2349     E-Mail: info@boedeker.com

©     Copyright Boedeker Plastics, Inc.