DESCRIPTION Hydex ® 105-61 is a proprietary high temperature thermoplastic product designed for superior dimensional stability over a wide temperature range. It can be used as an alternative to Torlon ® 5530 (30% glass filled Torlon).
No further information on this material is available at this time.
|
PRELIMINARY PROPERTIES of HYDEX ® 105-61 | ||||
| ASTM or UL test | Property | Hydex ® 105-61 | ||
| PHYSICAL | ||||
| D792 | Density (lb/in³) (g/cm³) |
0.051 1.42 |
||
| D570 | Water Absorption, 24 hrs (%) | < 0.3 | ||
| MECHANICAL | ||||
| D638 | Tensile Strength @ Break (psi) | 10,000 | ||
| D638 | Tensile Elongation @ Break (%) | 4 | ||
| D638 | Tensile Modulus (psi) | 480,000 | ||
| D790 | Flexural Strength (psi) | 15,000 | ||
| D790 | Flexural Modulus (psi) | 490,000 | ||
| D256 | IZOD Impact Notched (ft-lb/in) | 0.4 | ||
| D785 | Hardness, Rockwell | - | ||
| THERMAL | ||||
| D696 | Coefficient of Linear Thermal Expansion (x 10-6 in./in./°F) |
0.17 | ||
| - | Max Operating Temp (°F / °C) | 350 / 175 | ||
| UL94 | Flammability Rating | - | ||
| ELECTRICAL | ||||
| D149 | Dielectric Strength (V/mil) short time, 1/8" thick | - | ||
| D150 | Dielectric Constant at 1 KHz | - | ||
| D257 | Volume Resistivity (ohm-cm)at 50% RH | - | ||
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.HYDEX is a registered trademark of A.L. Hyde Company.
All values at 73°F (23°C) unless otherwise noted.
©
Copyright Boedeker Plastics, Inc.